Performance Road Tubeless Pro Starter Kit (w/ Continental GP 5000 S & Dynaplug Racer Pro)

Performance Road Tubeless Pro Starter Kit:

Going tubeless on the road has never been easier. This carefully selected kit includes all our favorite tubeless parts and accessories to get you setup and rolling.

Features:

• Grand Prix 5000 S Tubeless Tires are the favorite of pros and amateurs alike. They are known for their unmatched combination of speed and durability
• The Dynaplug Racer Pro is the ultimate roadside tubeless fix with 4 tire plugs at the ready
• Vittoria Multiway Tubeless Valves are optimized for airflow and include a built-in valve core tool cap
• Orange Seal Tubeless Sealant has proven itself as one of the most reliable sealants on the market

Includes:

• (2) Continental Grand Prix 5000 S Tubeless Road Tires (700 x 28mm)
• (1) Dynaplug Racer Pro Tubeless Repair Tool
• (2) Vittoria Multiway Tubeless Valves (w/ Valve Core Tool) (60mm Length)
• (1) 8oz Bottle of Orange Seal Tubeless Sealant (w/ Injection System)

Tubeless Setup:

• Verify that your wheels are “tubeless-ready” and tubeless rim tape is already installed.
  • If your rims are tubeless-compatible but don’t have, you will need to retape them.
  • Usually, you will want to choose tubeless tape that is slightly wider than your rim’s measured inner width (Example: 21mm tape for 19mm inner width rims).
• Install tubeless valves
  • Ensure that there a tight fit between the rubber base of the valve and the rim tape.
  • Snuggly hand-tighten the nut
• Install tires
  • Take care not to damage the tire bead if using a tire lever.
  • Message the tire around the rim to move slack to the last and most challenging section.
• Remove Presta valve cores using the valve core removal tool on the valve cap.
• Add sealant using the Orange Seal Injection System.
  • Tube fits over the end of the Presta valve
  • Use 2oz of sealant per tire (8oz bottle is enough for 4 tires).
• Reinstall valve cores
• Inflate quick using an air compressor or
  • If tires don’t seat, you can remove valve cores for better airflow.
• Move wheels around to ensure that the sealant can move about the chamber and stanch any small leaks.

Tubeless Maintenance:

• Top off sealant every 2-3 months (sometimes requires more in hot weather)
• Use the Dynaplug Racer Pro to plug small-to-medium size punctures (larger punctures may require a boot and an inner tube) -.
• Replace tires when the tire wear indicator (small indentation in the tread) is no longer visible

Package Includes:

2 x 1 x 1 x 1 x